When you buy through links on our site, we may earn an affiliate commission at no cost to you.
Top 10 Rated hockey puck jack stand in 2023 Comparison Table
Bestseller No. 1
Mission Automotive 2-Pack of Rubber Jack Pads (Slotted Pucks) – Universal, Standard-Size Adapter – Frame Rail Protector Puck/Pad Keeps Pinch Weld, Paint and Metal Safe
- Protects Your Vehicle And Your Jack — Our jack pads sit on top of your jacks to provide protection and cushion when lifting your car, both to the sensitive areas of the vehicle itself as well as the jack that’s doing the heavy lifting. No more damage to pinch welds, paint scratches or metal damage
- Made From High Quality Material, Built To Last — Made from a blend of purpose-specific, highly durable rubber, our jack pads are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike
- Fits An Array Of Jacks, Stands And Vehicles — Our pucks are made to fit a wide array of jacks / jack stands and vehicles. Their universal size allows them to meet a wide-array of needs, though exact fit will vary
- Value Pack — Our set includes two jack pads, providing the value you need to get the job done right – without sacrificing quality.
- Dimensions — Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack
Bestseller No. 2
YZ-Room Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck/Pad
- ★【High Quality】Heavy duty construction rubber material，MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
- ★【UNIVERSAL】Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
- ★【Size】Diameter: 125mm. Thickness: 26mm. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
- ★【Jack Support Cushioning Pressure Pad】Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
- ★【Package includes】1 x jack pad; By the way,Satisfaction Warranty: any dissatisfaction please contact us for help/support. Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while !
Bestseller No. 3
Newace Specific Jack Pad Compatible with Tesla Model 3,Y, 4 Packs with Storage Bag Lift Adapter Puck, Protect Battery,Paint & Chassis
- Safely Raising Vehicle – Made of durable, anti-damage NBR rubber to prevent car battery or chassis from damage. Pressure-bearing force 1000kg.
- Model-SPECIFIC ADAPTERS for Tesla Models 3 and Model Y. Our specifically designed jack adapters will click into jack points and provide a much safer and sturdier jacking point that won’t slip or move when lifting the vehicle.
- Easy and quick installation -Insert the adapter pad into the vehicle’s jack point hole and position your jack directly underneath, just make sure the jack is centered on the adapter pad.
- Extra thick O-ring for a deep grip-Thicker than most competitors on the market. Our tesla jack pad will stay very tight in the vehicle jack point.This design of O-ring also helps you preinstall the tesla lift pucks which allows for an easy placement of either the floor jack or lift.
- Storage Bags keep jack lift pads organized. Features low profile to accommodate taller floor jack saddles and higher 2-post lift arms.
Bestseller No. 4
GeeWatom Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck/Pad (1 Pack)
- 【High Quality】Heavy duty construction rubber material，MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
- 【Fits most Floor Jacks and vehicles】Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
- 【Size】Diameter: 125mm/4.92inch. Thickness: 26mm/1.02inch. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
- 【Jack Support Cushioning Pressure Pad】Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
- 【Package includes】1 x jack pad; By the way,Satisfaction Warranty: any dissatisfaction please contact us for help/support. Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while !
Bestseller No. 5
Chirano Lifting Jack Pad for Tesla Model 3/S/X/Y, 4 Pucks with a Storage Case, Accessories for Tesla Vehicles
- 【A MUST HAVE FOR YOUR TESLA VEHICLE】Many of you may know, there are specific jack points for the tesla vehicle. Without an adapter, you may risk damaging the battery of the vehicle when raising it to rotate tires.
- 【Protect battery and paint from damage】The rubber O-ring helps you preinstall the lift adapter which allows for an easy placement of either the floor jack or lift.
- Storage bags keep jack lift pads organized. Easy to store in your trunk or garage.
- Dimensions are 2.7” diameter. 1” tall not counting the portion that goes into the hole. Can be used with floor jack or 2-post lift. 1PC for personal owner with a floor jack or all 4 for a 4-point professional vehicle lift in the auto repair shop. 【NOTE】For Model X, it might be a little bit loose for the hole and you might need to line up the pad in the hole while raising the the car
- Every product sold by Chirano is new. if you have any issue after receiving our products, please ask for a replacement or refund and we would be happy to process without question.
Bestseller No. 6
iFJF LicBund Rubber Jack Pads Frame Rail Adapter for Pinch Weld Side Universal Jack Pad
- Fitment: Suitable for all kinds of jacks/vehicles, the general size can meet a variety of needs
- This jack pad are made of high quality rubber and self-flexibility to provide cushioning and protection during jacking so that the vehicle can be safely jacked without damaging the welded or rocker panels.
- Anti-sliding design: The jack pad is located at the top. When the vehicle leaves, there will be no gasket sliding, which will protect your vihicle and paint safely.
- Hard texture: Made of hard rubber to prevent the jack from exposing the structural metal, designed to protect the clamping weld and improve safety when properly secured.
- Size:Fits most pinch weld that is at least 3 inches. The opening of each slotted jack pad is 34mm” wide .by 71mm in length. Slot depth is 0.5″. thickness is 34mm.Base diameter is 71mm”
Bestseller No. 7
Carwiner Jack Pad Compatible with Tesla Model 3/S/X/Y, Lifting Pucks with a Storage Case Accessories (4 Packs)
- [Applicable Model] Use the original car data to break the would, one-to-one specifically designed for Tesla Model 3/Y/S/X.
- [Function] When using a jack, too much gravity or too small a fulcrum will cause certain damage to the car. The rubber pad can protect the original car chassis from being worn and painted.
- [High-Quality Material] It is made of rubber and is very durable. The soft rubber pad has a cushioning effect. The cushioning effect will transfer the possibility of deformation to the rubber pad without causing damage to the body.
- [Easy to Use] Just Install the adapter pad into the vehicle jack tip hole, and align the jack directly under it. make sure that the jack is centered on the adapter pad.
- [Easy to Store] The included storage bag can keep the jack pads in order. Easy to store in a suitcase or garage.
SaleBestseller No. 8
DEDC Floor Jack Rubber Pad Universal Jack Adapter Pinch Weld Side Frame Rail Protector Puck/Pad (1 Pack)
- __MAXIMUM Load Bearing: 3 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
- __UNIVERSAL: Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle. This saddle pad was perfect for Pittsburgh Automotive 3 ton floor jack from Harbor Freight, model # 64266.
- __Size: Diameter: 125mm. Thickness: 26mm. Jack pading/puck/caps: This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
- __Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
- __Package includes: 1 x jack pad; By the way, this rubber jack pad smells like rubber is supposed to smell, a little bit stinks when new.
Bestseller No. 9
Spurtar Tesla Lifting Jack Pad Car Jack Lift Point Pad Adapter Tool for Tesla Model 3, Model S,Model X and Model Y Jack Stands 4 Pack with Storage Case – Tesla Accessories
- 2023 UPGRADE Jack Pads for Tesla: Spurtar 4 pieces Tesla Jack Pad with o-ring design for Tesla owners to protect car battery and chassis paint from damage while lifting your Tesla for maintenance
- MUST HAVE: Essential accessories for Tesla Model 3, Model S, Model X and Model Y. Upgraded o-ring design to fit tight enough in the car lift points and avoid lift sway. Easy installation, snug fit, easy to put on and take off by hand
- PRECISION DESIGN: The post on Spurtar jack pad precisely fits into top shaft factory lifting locations. The O-Ring provides sufficient “grip” to hold the tool in place during Tesla maintenance procedures
- SAFE & SECURE: The post on the jack pad precisely locates the tool in the center of the jack point on your Tesla. The lifting jack adapter can be used with floor jack, provides an amount of clearance between the batteries and the rim of the floor jack saddle
- 100% RUBBER: The Tesla model 3 jack pad is made of durable high-quality black rubber jack pad pucks with extra thickened bottom to ensure the best performance and safety when lifting your Tesla. Can be used with floor jack or 2-post lift
SaleBestseller No. 10
CPROSP Jack Lift Pad for Tesla Model 3/S/X Jack Point Adapter 4 Pack
- ▲ Size of tesla jack adapter / cprosp jack model 3: bottom diameter * bottom height = 75 * 23 mm, top size = 26 * 26 mm, weight = 156 g, manual measurement, there may be a 1-2mm error, suitable for most vehicles.
- ▲Material of tesla jack pucks: The sturdy rubber structure can support most vehicles, such as cars and motorcycles, providing better cushioning and compressive strength. A soft rubber surface that does not scratch painted or coated frame parts.
- ▲Applicable to most jacks and vehicles, as well as the basic equipment in the machine shop, compare the dimensions and make sure it is suitable for your vehicle.
- ▲ Frame rails and clamping welds are effective in preventing breakage and bending when lifting the cab.
- ▲Tesla Lift Pads are manufactured by professional manufacturers with quality assurance.
Are you finding for top 10 best hockey puck jack stand for the money in 2023? After evaluating and analyzing in detail more than 56,676 customer satisfaction about top 10 best hockey puck jack stand in 2023, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:
Our Best Choice: A ABIGAIL Rubber Jack Pad (Slotted) – Universal, Standard-Size – Frame Rail Protector
Product or service Description
About A ABIGAIL Rubber Jack Pads (Slotted) – Universal, Regular-Sizing – Frame Rail Protector
Jacking details on some vehicles typically get damaged owing to the wrong jack pad stand getting used when lifting the auto. So we created this rubber jacking pad. Our pads are designed out of reliable rubber to assure the utmost safety when lifting the automobile.
– Designed of Durable rubber construction and cross-slotted structure, delivers far more cushion and crush resistance.
– 2-4 Ton highest Load Bearing, Medium size, and shape suits most jacks and motor vehicles, please validate proportions and assure fitment to your automobile.
Employed to protect the undercarriage metal jack issue railing that is on vehicles.
Sturdy and resistant to problems, it will retain the chassis rails from obtaining pinched, bent and broken.
Durable more than enough to aid your elevate issue though soft more than enough to blocking crushing the get in touch with region.
Made by a qualified manufacturer for a top quality top quality items.
Uncomplicated to run, acceptable for most vehicles.
Pad Dimensions:71mm / 2.8 inches in diameter,33mm / 1.3 inches height.
Slot Dimensions:13mm / .5 inches Wide 13mm / .5 inches deep.
Deal Consists of
Common in shape
Common in good shape
Universal in shape
Package deal Incorporates
Chevy Corvette C5 C6 C7
Tesla Design 3/Design S/Design X/Design Y
High High-quality: Designed from very sturdy rubber which will offer far more cushion and crush resistance. This rubber jack pad may well smell a minor bit stinks when it is really new. Remember to do not head it.
Perform: A ABIGAIL Jack Pad is built to be sturdy sufficient to assistance your elevate point though tender sufficient to stopping pinch Weld Seams and Body Rails from bending or breaking when jacking up your car or truck.
Pad Proportions:71mm / 2.8 inches in diameter, 33mm / 1.3 inches peak, Slot Proportions: 13mm / .5 inches Extensive 13mm / .5 inches deep.
Most Load Bearing: 2-4 Ton, medium measurement and form matches most jacks and automobiles, be sure to verify dimensions and ensure fitment to your motor vehicle.
Company: 100% gratification assurance, If you have any challenges with the Jack Pad, only get in touch with consumer assistance for troubleshooting enable, sections, alternative, or refund. Our aim is to make you satisfy the areas and the provider we offer for you.